Skip to main content

Morris Lee join the CGS family

By Canadian Gas Safety

We are happy to announce our new manufacturer representative for Canada, Morris/Lee, Ltd

Morris Lee, LTD.








Morris/Lee, Ltd is a member of the Elmco Group International, a widely known manufacturer representative as one of the best in the industry in Canada & North America. Across the whole of Canada, Morris/Lee have individual sales representatives promoting CGS products and the importance of gas safety.

We are looking forward to the prosperous future with our new addition to the Canadian Gas Safety family.

For further information on the sales representatives please click the following link –

Carbon Monoxide Kills

By Canadian Gas Safety

Did you know each year 400 deaths and 50,000 visits to the emergency room are caused by CO poisoning across Canada & the U.S.
Is your building and life protected from the Silent Killer Carbon Monoxide? You cannot smell or see Carbon Monoxide, but you can detect it. 

Fig 1. CGS Mini Merlin (Combined Natural Gas & Carbon Monoxide Monitor)

While natural gas has a rotten egg smell that helps with detection, carbon monoxide is odorless. To detect it, a carbon monoxide alarm is required which is why you need a CO alarm in your home and business. The initial symptoms of carbon monoxide poisoning are flu-like, but without a fever. They may include dull headache, weakness, dizziness and nausea. High-level poisoning can result in vomiting, shortness of breath, confusion, blurred vision, loss of consciousness and in some cases, death.

If you want to add cost effective life safety and insurance to your next project, use the CGS Mini Merlin. It is the most affordable, adaptable and compact CO detection and isolation device on the market.

Designed as a standalone plug and play product, most commonly installed in boiler houses to identify problems with flues & boiler equipment, commercial kitchens for air quality monitoring plus natural gas leak detection for various applications. The Mini Merlin features modern components with multiple inputs & outputs to adapt the operation of the monitor, including panic & fire alarm shut down, BMS/BAS connectivity and utility isolation.

Example installations are below:

Commercial Boilerhouse

Commercial Boilerhouse

Residential Boilerhouse

Residential Boilerroom

For further information on our Mini Merlin contact our offices or your local representative today –

Taking you behind the scenes

By Canadian Gas Safety

Pictured above is a insight on the continuous work carried out at the factory, now manufacturing over 3000+ Merlin controllers every month!

With 4 full time design engineers and 24 factory staff, we are continually evolving our products to keep us market leaders within the Gas Safety industry.

For further information on our Merlin range of controllers or if you are currently looking at any commercial or educational projects, please contact us on info@canadiangassafety/647-577-1500

Detectors Coverage & Location

By Canadian Gas Safety

There are no official figures of the area coverage of gas detectors; however, 50-100m2 per detector is a reasonable general guide.

There are no specific standards governing gas detector location (unlike fire detection systems); there are, however, general guidance documents. The most relevant being IEC 60079-29-2: Part 29: Gas detectors – Selection, installation, use and maintenance of detectors for flammable gases and oxygen. Much of what it covers is also relevant to toxic gas detection.
Detectors should be mounted where a potential hazard of gas is most likely to be present.

The following points should be noted also when locating gas sensors. When locating detectors consider

• The possible damage caused by natural events e.g., rain or flooding.
• Ease of access to the gas detector for functional testing, observation and service.
• How gas may behave due to natural or forced air currents.

Locations for detectors will vary based on the intended application and target gas, they should be located near identified sources of a potential gas leaks/pockets where gas could quickly accumulate and areas of identified consequential risk to detect gas. The composition of the target gas and its density relative to air are used as the basis for the recommended height of sensors.

Generally, the installation height of a sensor for a heavy gas (such as propane) would be close to the lowest point in the area, and for a light gas (such as methane) would be close to the highest point in the area. These recommended heights may vary based on air flow and temperature conditions in addition to the proposed application and location – this is particularly apparent with oxygen depletion sensors, and the target gas that they are used for.

Target Gas Typical Position
Natural Gas/Methane (NG) High Level – (1ft) from ceiling
Liquid Petroleum Gas (LPG) Low Level – (1ft) from ground level
Carbon Monoxide (CO) Breathing Zone – (5ft 6”) from ground level
Carbon Dioxide (CO2) Breathing Zone – (5ft 6”) from ground level
Hydrogen (H2) High Level – (1ft) from ceiling
Oxygen (O2) *Breathing Zone – (3 – 5ft) from ground level

* If you are installing and monitoring Oxygen depletion – consider the density of gas for its application and position the detector accordingly i.e. ground level for high density gases

Canterbury High School Now Protected With New Technology

By Canadian Gas Safety

Multiple CGS Utility Controllers have been fitted out in the new state of the art science laboratories

Canadian Gas Safety are now protecting the science laboratories with the Merln 1000SW+, which controls the Gas, Electric & Water Utilities in the science laboratories. One of the key features the controller features is the unique gas pressure proving technology, which ensures upon start up and throughout the operation of gas, there are no gas leaks on the line. If there is a gas leak, the system will automatically shutdown the utilities and activate an alarm condition.

The CGS Merlin systems have built in connectivity allowing the panel to communicate with the schools BMS and has connections for the buildings existing fire alarm system. The panel can either tell the BMS that the gas is “ON” or “OFF” with the flick of a switch on the internal control panel or is in a fault condition.

For further information on our Merlin range of utility controllers or any of our product solutions, please contact us on / 647-577-1500.