CGS GDP2X Oxygen System

The CGS GDP2X is a 8 zone detection panel. Up to 8 detectors can be used in any combination and can be individually monitored on the GDP2X TFT display.

The CGS GDP2X has a touch screen which displays two modes, the engineers mode and the user mode. A settings dip switch inside the controller allows the engineer/user to configure the system. When changes have been, the system will automatically restart once the settings switch is off.

The CGS GDP2X can be integrated with a BMS, mechanical ventilation, fire alarms and remote emergency buttons. Gas detectors are remote hardwired from the GDP2X panel. The GDP2X can activate remote audible alarm strobes in alarm through the designated 24VDC output. Liquid line solenoid valves and electrical contactors controlling appliances can also be shutdown in alarm.

Check out our design ideas tab for the most popular solutions.

CGS Oxygen Gas Detectors

The CGSO2TFT is an oxygen depletion/enrichment electrochemical detector and is typically used as a standalone unit or in conjunction with an CGS controller. Oxygen detectors should be mounted 3-5ft from the ceiling of the protected area. At detection, the detectors will go into alarm at either >18.5% V/V or <23% V/V. When connected to an CGS controller, built-in alarm relay outputs can be used to activate the power supply to a remote audible alarm, activate ventilation fans or shutdown equipment. This can then be rectified by resolving the leak, allowing the sensor head to clear and resetting the attached CGS panel and detector.

For further information on our Merlin gas detectors please refer to our product data sheet.

CGS Audible Alarm Strobe

• Alarm/siren offers 32 selectable sounds and volume control.
• Include high intensity LEDs.
• 8 flash patterns.
• Typical working properties of polycarbonate are -40˚ to 250˚F (-40˚C to 121˚C).
• Three year guarantee against breakage of polycarbonate in normal use
  (one year on electro mechanical and electronic components).
• Designed to meet the requirements of IP54.

For further information on our audible alarm strobes please refer to our product data sheet.