Skip to main content
search

Emergency Gas Shutdown Solution

Manual Shutdown Relay With Added Gas Detection

CGS Mini Merlin

If there is a dangerous build-up of gas or unsafe levels of carbon monoxide at the sensor, this device can shut off the gas supply via a gas safety valve and/or a gas fire appliance. A code requirement in various states in the U.S.

This device has additional features for resetting systems, as well as audible and visual alarms – it can also be integrated with a Building Management System (BMS). For further information on our Mini Merlin refer to our datasheets or alternatively contact our offices today.

Plug & Play Installation – Pre-Programmed Inputs & Outputs

POWER/LINE IN Mains Input: 100-120V ~ 50/60Hz
VALVE OUT Gas Valve Power Output: 100-120V ~ 50/60Hz
Auto Reset & Buzzer Switches
BMS CO 0.5A SWITCHING CURRENT (RESISTIVE LOAD) Switches when CO gas reaches alarm level or if detector encounters a power failure.
REMOTE SHUT OFF Open / Close Circuit Connector Shuts off gas valve if external devices are activated i.e. fire alarm etc
BMS NG/LPG 0.5A SWITCHING CURRENT (RESISTIVE LOAD) Switches when Methane/LPG gas reaches alarm level or if detector encounters a power failure.
Anti-Surge 3.15A 250Vac Fuse, Wire Rating Min. 18AWG, Tinned Copper @ 167°F
Gas Level & TFT Status Display
ULC Listed 61010
Manual Reset After Alarm Condition

Popular Applications

  • Outdoor Amenity Areas
  • Boiler Rooms
  • Industrial Spaces
  • Laboratories
  • Commercial Kitchens
Close Menu